Supplied in 8m lengths but can be cut to length if required (an additional charge will apply)

DuraGal Square Hollow Sections (SHS) are high strength cold formed structural hollow sections that are In-line Hot dip galvanized over a prepared metal surface to produce a fully bonded coating with a minimum average coating mass of 100g/m2 in accordance with AS/NZS 4792: Hot-dip galvanized zinc coatings on ferrous hollow sections applied by a continuous or specialized process. The external zinc coating then has a surface conversion coating applied to improve resistance to white rusting and improve the adhesion of paint and powder coatings.

Internally painted DuraGal Hollow Sections are also available for selected sizes.