With an attractive look and a durable nature, Woodgrain Panel is perfect for the interior lining of activity and entertainment rooms or that special feature wall.

Cemintel Woodgrain Panel has a mass of approximately 10kg/m2, and is available in 1175 x 2540 and 1175 x 2700mm sheets

Advantages

• Natural timber look that sets the tone for any room
• High impact resistant coupled with the strength of contemporary fibre cement sheeting
• Low level maintenance
• Ability to be transformed to any colour or shade

Installation
Cemintel Woodgrain Panel may be fixed to timber framing using 2.0 x 30mm galvanised nails or to steel using No.8 x 20mm needlepoint screws. The sheets should be fixed vertically and jointed with H-moulds.

Studs must be spaced at up to 600mm centres. Fix sheets at 300mm centres in the body and at 200mm centres at edges. When jointing off-stud, fix the sheet to a nogging at mid height. Fasteners must be positioned a minimum of 12mm from sheet edges and 50mm from sheet corners.

Cemintel Fibre Cement is easily cut on site using a tungsten-tipped score and snap knife, a hand guillotine or hand saw.

Joint Treatment and Decoration
Cemintel Woodgrain Panel is jointed using a PVC joint mould.

Woodgrain Panel is supplied unpainted but can be easily finished with two coats of acrylic paint. The surface must be clean and dry before application. In all cases the paint manufacturer's instructions are to be followed.