|
The Coldbuster heaters are
supplied pre-configured, held together with self adhesive tape. The range of
heater sizes and shapes accomodates any room size or shape.
specifications:
heat
width: |
600mm |
heat
length: |
7.26m |
Heat
Area: |
4.356m2 |
Heat
Watts: |
760
watts |
Installation is uncomplicated
with the supplied installation guidelines. Coldbuster tile heating is classified
as an appliance and can be installed by any competent person. The heater must
be connected to a RCD (safety switch) protected circuit by an electrician. All
wiring must conform to AS/NZS 3000:2000 and local wiring regulations.
The Coldbuster tile heater
is installed directly under the floor tiles on top of the tile bed. Once the
subfloor has been prepared, apply a bonding liquid to the area, attach the Klimaguard
installation monitor to the heater, stick down the self adhesive heater, stick
down the self adhesive fibreglass mesh, lay your tiles as usual and make the
final connection to the thermostat. Once the tile adhesive and grouting has
cured, you can turn on your tile heater and begin enjoying warm floors.
DIY
Just couldn't be easier!!
Once you have bought your
Colbuster tile heater kit, the installation guidelines will guide you through
the installation process - click
here for a step by step outline.
The
Coldbuster Tile Heater Kit is supplied with:
- Coldbuster heater mounted
on self adhesive tape
- Klimaguard installation
monitor
- Self adhesive fibreglass
mesh
- Electonic thermostat
with programmable timer
- Installation guidelines
- 5 Year product guarantee
Features:
- Pre-configured element
mounted on self adhesive tape
- 1mm thin element does
not affect floor levels
- Element is fully earthed
& waterproof
- Durable & reliable
- Easy installation, no
special tools required
|
