These fully flashed tubelight kits provide everything you need to bring natural
light into your living environment and are ideal for the handyman and tradesman
alike. Kits are complete with :
- acrylic dome fixed to a fully flashed metal base
- 1.5m of highly reflective, uv resistant reinforced flexilight skylight
shaft
- circular ceiling trim and diffuser
Fire dampers are available as an optional accessory for fire rated installations.
Corrugated Roof
A press formed metal base closes off corrugations neatly reducing the usage
of unsightly sealants resulting in a perfect finish. An inbuilt soaker tray
directs water into the corrugations, eliminating ponding that can occur behind
tubelights installed on low pitched roofs. This reduces corrosion and increases
the service life of the tubelight. The corrugation profile offered is manufactured
to match Standard Custom Orb corrugated roof sheeting and similar profiles.
corrugated
Tile Roof
A press formed metal base follows the tile line allowing tiles to sit neatly
around the base for that perfect appearance. Lead free construction eliminates
corrosive run-off to Zincalumeq and Colorbond flashings and gutters. Adapters
are supplied on request for Wunderlich Swiss and similar high profile tiles
- please advise iof this is required.
Tile
Universal Metal Deck Roof
A press formed metal base suits most forms of metal deck roofing with rib heights
of up to 50mm. Rolled shoulder design inhibits leak and detritus build-up on
low pitched roofs common to traditional designs. This eliminates leaking problems
and increases the service life of the tubelight.
Universal metal deck
Steel Deck Roof (Kerb Style Overflashing type)
Steel Deck Tubelights are generally used for flat roofs where a hob or kerb
has been supplied by the builder, or is intended to be built. They are suitable
for kerbs constructed out of steel, concrete or timber. Please refer to the
installation guide for differing kerb types available from the Regent Skylights
website.
Flat deck
Standard tubelights are constructed with a press formed Zincalume base and a
high impact acrylic (prismatic) dome. Custom fabricated bases are available
(in stainless steel, aluminium, copper and galvanised) to meet individual customer
requirements.
|
