| Regent Skylight Systems manufacture easy fit, one piece flashings ideally suited for instances where you want to install a Velux skylight but have a roof pitch of less than 15 degrees (Standard Velux flashings require a pitch of 15 degrees or more to function properly.
Regent Press-Formed Flashing Bases makes VELUX® installation easy and inexpensive.
Optional fixed ventilation can also be provided, unlike standard 4 piece flashing
kits supplied by Velux
Corrugated Roof
A press formed metal base closes off corrugations neatly reducing the usage
of unsightly sealants resulting in a perfect finish. An inbuilt soaker tray
directs water into the corrugations, eliminating ponding that can occur behind
skylights installed on low pitched roofs. This reduces corrosion and increases
the service life of the skylight. The corrugation profile offered is manufactured
to match Corrugated Custom Orb and similar profiles.
Lead Free Tile
A press formed metal base follows the tile line allowing tiles to sit neatly
around the base for that perfect appearance. Lead free construction eliminates
corrosive run-off to Zincalume and Colorbond flashings and gutters. (Adapters
are required on request for Wunderlich Swiss and similar high profile tiles
- please advise tile type when ordering in the notes section of the shopping
cart process)
Low profile Metal Deck
A press formed metal base suits most popular forms of metal deck roofing with
rib heights of up to 50mm.Rolled shoulder design inhibits leaks and detritus
build-up on low pitched roofs common to tradition designs. This eliminates leaking
problems and increases the service life of the skylight.
Flashed Metal Deck
Flat Deck Skylights are generally used for flat roofs where a hob or kerb has
been supplied by the builder, or is intended to be built. They are suitable
for kerbs constructed out of steel, concrete or timber. Please refer to the
installation guide for differing kerb types |
