
Australia wide delivery |
|
Availability: |
Australia Wide |
|
Lead Time: |
2-3 days |
|
Freight: |
Sydney metro - Free
All other major capital cities - $60
Regional areas to add an extra $40
|
|
Other: |
Orders less than $120 add $15 handling fee |
|
Live in a brighter world
that spreads abundant natural light into your living rooms, utility spaces
and hallways. Create dramatically lit rooms with sky views and improved ventilation
that look and feel stylish and stunning.

In the kitchen |

In the Bedroom |
With three models available
in a range of standard sizes, there is a Fakro skylight for every application and budget.
From commercial
multi-unit applications, to single bathroom renovations or attic conversions,
Fakro has the answer.
Go to the bottom of this page to select from the categories available
Choose
from 8 different sizes
| FV Model |

24/27 |

24/38 |

24/55 |

32/38 |

32/46 |

32/55 |

48/27 |

48/46 |
Nominal Frame
size SxK mm |
565x674 |
565x953 |
565x1372 |
768x953 |
768x1153 |
768x1372 |
1174x674 |
1174x1153 |
Outside Frame
size BxL mm |
623x699 |
623x978 |
623x699 |
826x978 |
826x1178 |
826x1397 |
1232x699 |
1232x1178 |

Features that make Fakro Skylights the best!
All Fakro Skylights have highly energy efficient Insulating Glass Units and are made from high quality Nordic pine, which are arguably the best on the market.
Insulated Glazing Unit
- Exterior toughened 4mm safety glass
for strength and durability
- Argon gas injected for increased thermal performance (14mm airspace)
- Low-E coating to reduce solar heat gain
- Laminated safety glass for strength
and maximum protection from fading
- Double thickness (0.76mm) laminating
interlayer for extra safety
and UV protection
|
 |
Combined, these features not only provide superior safety and energy efficiency, but also result in reduced fading, excellent sound insulation ratings and greater durability.
Timber Construction
- Wide, thick Nordic pine timber frames provide maximum stability to better resist warping and improve the long term integrity of the skylight.
- All timber components are placed in an autoclave and vacuum impregnated with preservative that reaches deep within the timber structure to prevent mould or moisture build-up, compared to surface applied preservatives on some other skylights.
- All timber surfaces are fully factory sealed with two coats of clear based lacquer to resist absorption of moisture and subsequent swelling or cracking.
- The UV protected lacquer provides a premium longer lasting finish, removes the need for expensive onsite finishing costs and allows the wood to be easily cleaned of finger marks after installation.
- The lacquered timber frame is fitted with condensation gaskets to ensure all moisture is directed externally for superior sealing.
Combined, these features reduce the level of maintenance required and extend the life and appearance of the skylight.
Skylights Tested and Approved
Cyclone Ratings
Fakro Skylights have been subjected to Cyclonic and Non Cyclonic Testing in a NATA (National Association of Testing Authorities) accredited laboratory.
Both the Fakro Fixed Skylight and Openable Skylight passed the test requirements of Australian Standard AS4285-1995, Skylights, for Resistance to Wind Pressure for Cyclone and Non-Cyclon Regions and the BCA's-1995.
Acoustic Insulation
Fakro Skylights have been tested for airborne sound insulation and achieved high level ratings of 36db's for Opening Skylights and 35db's for Fixed Skylights.
Cyclic Tests
All Fakro Opening Skylights have passed cyclic testing of 10,000 open/close cycles which is approximately 27 years of opening and closing the skylight once a day.
Concentrated Load Tests
Fakro Skylights have passed concentrated load tests of 1.1kN as per the default requirements of AS4285-1995.
For more technical information, visit the Skylight Technical page .
Skylight Flashing
Your roofing professional will be able to advise you on a suitable flashing for your Fakro Skylight which are described in detail below.
Constructed from polyester coated aluminium and malleable metal, Fakro Flashing Kits provide an unobtrusive and enduring water-tight fit.
Fakro Skylights have two main flashing types:
- EHA - used in applications where the skylight is fitted in high-profiled roofing materials such as tiles up to 90mm profile height or corrugated metal roof sheeting. Not recommended for wide span high-profile roof decking with rollformed ridges of 35mm or greater, as custom flashing would be required.
- ELA - allows skylights to be flashed with thin flat roofing materials such as slate or shingles.
Skylights require a roof pitch between 15 and 60 degrees. Custom made flashings which pitch the skylights at 15 degrees or more may be necessary on lower (flatter) roof pitches.
The use of Fakro Skylights in roof pitches above 60 degrees is not recommended and the manufacturers warranty is voided in such applications. |


|
Click on a category below for sizes, more info and ordering
Need someone to install these products for you? click here |