OneSteel is the largest manufacturer of steel long products and is the leading metals distribution company in Australia, with revenues of $3 billion Australian dollars. OneSteel has over 200 operational sites in Australia and New Zealand, more than 30,000 customers and employs approximately 6,900 people.
OneSteel manufactures and distributes structural, rail, rod, merchant bar, cold finished bar, chrome plated bar, reinforcing, wire, tube, pipes, fittings, valves and actuation. The majority of OneSteel's products are used in the construction, manufacturing, housing, mining and agricultural industries.
NOTES ON DELIVERY
OneSteel's Steel and Tube division have put together some useful information, which may be able to assist you in the understanding of the constraints involved in its Hiab truck deliveries and continue to assist you in the safe delivery of your product to the premises required. We require to add relevant delivery information to your profile and ask for your patience and assistance with this.
It is your responsibility to advise the following - Any goods that are not able to be delivered and require being returned to the store and subsequently requiring a re-delivery will be at the customer's expense if due to the failure to do so:
- Preferred Time of Delivery Window (eg 9am-3pm):
- Are there any other potential hazards, which may impede safe delivery. (Power lines/walls etc)?
These dimensions(length and width) are for the normal Hiab we use.
Truck width: 2.4m
Truck lengths: from 9m to 13m
The driver will also require a 2m exclusion zone either side of the truck in the unloading area.
Vehicle is not allowed within 2 metres of 240v distribution overhead power lines or within 6 metres of high voltage (1500v) overhead power lines.
Drivers are not allowed to bar loads off truck trays.
Drivers are allowed to assist the appropriately trained and competent forklift driver or crane driver.
Drivers have the right under the NTC & RTA Chain of Responsibiltiy to refuse to load/unload if it is deemed unsafe.
