Categories
Reviews more


Roofing & Fencing > Lysaght Building Products > Purlins
 

The LYSAGHT® SUPAPURLIN profiles consist of a LYSAGHT SupaZed® and SupaCee® profile. These SUPAPURLIN are an advancement of the traditional Zed and Cee profiles. The benefits of the traditional Zed and Cee profiles are retained, however there are substantial added benefits of the new LYSAGHT SupaZed® and SupaCee® purlin profiles.The features of the traditional purlins that are the same in the SUPAPURLIN shapes are:

  • Single web
  • Top & Bottom flange. The Cee profile has equal flanges. The Zed profile has the flanges facing in opposite direction and one flange is "wide" and one is "narrow" to allow lapping.
  • Lip stiffeners at the free end, or extremity, of the flange. These lips point back towards the centre of the profile.

NOTE - Supa Purlins are only available in NSW. Traditional Purlins will be supplied for enquiries in other states

Improved Performance

The efficiency of the SupaPurlin profiles delivers significant savings. Performance improvements can be achieved over traditional zed and cee purlin designs, when using LYSAGHT SupaZed® and LYSAGHT SupaCee® Purlins. The result is increased purlin spacing, increased purlin spans (frame or rafter spacing) and fewer rows of bridging.

(Performance comparisons vary by individual purlin size, span configuration and bridging configuration. We can help with design comparisons for your next project.)

Capacity Gain - SupaZed® over Traditional Zed Purlin

 

LYSAGHT SupaZed® & SupaCee® Purlins capacity

Indicative only, subject to design criteria and assumptions used.

 

Please Note: When comparing the capacity of LYSAGHT® purlins with other purlin profiles care needs to be exercised. Comparisons can only be successfully completed when a "like-for-like" comparison is made. Differences can result from a number of reasons such as the selection of design parameters for;

  • Cleat restraints, cladding restraints
  • Bridging location
  • Profile dimensions
  • Lap length

Features

  • Longitudinal web stiffeners (4 off)
  • Lip has an added stiffeners at the free end, or extremity, of the lip. These added stiffeners point back towards the web of the profile
  • No change to the accepted practices of packaging, marking and handling.
  • No change to the accepted traditional practices of installation. The lapping method is unchanged, the cleat fixing is unchanged, the bridging installation is unchanged, the fixing of fly bracing and accessories is unchanged
  • Minimal face-to-face metal contact means minimised staining of surfaces, and no locking of purlins in frozen bundles.
  • Purlin nesting results in no wedging/interlocking of purlins in bundles means ease of separation on site.
  • Rounded lips means added site safety from handling of sharp edges.
  • Rounded corners means added site safety due to ease of sliding of purlins on rafter surfaces, and no damage to surfaces of painted rafters from sliding of purlins during installation.
  • Rigidity of purlin means added safety and less labour requirements during the flipping of purlins during installation onto cleats.
  • Unique patented profile, which cannot be copied. What is specified is what you get. Thus the design strength is not compromised and the material is guaranteed to be Australian
  • Significant improvement in strength performance can be achieved in many purlin sizes and span configurations. Thus there are considerable further economic benefits to be made
  • LYSAGHT® SupaPurlin software available from the University of Sydney, please visit our page LYSAGHT® SupaPurlin Software

Common Uses of this product

Commercial, industrial and rural buildings, medium and small structures such as sheds and awnings, structural frame of small and medium sized buildings, racking frames, wall framing such as stud and plate/track, floor joists, rafters and beams, posts

Warnings

  • Manufactured in NSW, QLD and SA, availability in other states is on an application basis
  • Purlins should be stored off the ground and on a slight slope so that water can drain away
  • Direct contact of incompatible material with coating should be avoided. In such applications, suitable paint systems should be obtained from paint manufacturers
  • Special transport requirements are needed for lengths over 12000mm

Product Details

Schematic

Dimensions

Type SupaZed® Type SupaCee® Mass per unit
Length (kg/m)
  t D E LE F LF   B LB  
SZ 15010 1.0 152 63 17 48 16 SC 15010 57.5 17.5 2.38
SZ 15012 1.2 152 66 18.5 49 16.5 SC 15012 60.5 18 2.89
SZ 15015 1.5 152 66.5 18.5 49.5 17 SC 15015 61 18.5 3.58
SZ 15019 1.9 152 67.5 19 50.5 18 SC 15019 62 19 4.51
SZ 15024 2.4 152 70 20 52 19 SC 15024 63 20 5.67
 
SZ 20012 1.2 203 76 19.5 62 19.5 SC 20012 70 21 3.62
SZ 20015 1.5 203 77 20 63 20 SC 20015 70.5 21.5 4.49
SZ 20019 1.9 203 79.5 21.5 63.5 21 SC 20019 73 23 5.73
SZ 20024 2.4 203 81.5 22 65 22 SC 20024 74.5 24 7.20
 
SZ 25015 1.5 254 78.5 19.5 67 20 SC 25015 72 22.5 5.16
SZ 25019 1.9 254 78.5 21 65 21 SC 25019 72.5 23 6.50
SZ 25024 2.4 254 80.5 22 66 22 SC 25024 74 24 8.16
 
SZ 30019 1.9 300 103.5 25 88 26 SC 30019 97.5 27.5 8.02
SZ 30024 2.4 300 104.5 26.5 87.5 27 SC 30024 99 28.5 10.09
SZ 30030 3.0 300 106.5 28 88 28 SC 30030 100.5 29.5 12.56
 
SZ 35024 2.4 350 131.5 28.5 114 31 SC 35024 124 33.5 12.20
SZ 35030 3.0 350 134 30 115 31 SC 35030 125.5 34.5 15.19
 
SZ 40024 2.4 400 131.5 28.5 114 31 SC 40024 124 33.5 13.16
SZ 40030 3.0 400 134 30 115 31 SC 40030 125.5 34.5 16.39
SZ 40032 3.2 400 134.5 30.5 115.5 31 SC 40032 126.5 34.5 17.46

NOTE : Dimensions have been rounded off to the nearest 0.5mm

Specification

LYSAGHT SupaZed® and LYSAGHT SupaCee® are roll-formed from GALVASPAN® steel complying with AS1397 - 2001 in the grades shown. The number prefixed with a Z indicates the minimum coating mass in g/m 2 :

  • 1.0mm BMT: G550 Z350*
  • 1.2mm BMT: G500 Z350
  • 1.5, 1.9, 2.4, 3.0, 3.2mm BMT: G450 Z350

* Coatings for C10010/Z10010 may vary from centre to centre. Contact your local BlueScope Lysaght Centre for advice.

Capacity Tables

The capacity tables are based on the latest version of AS4600.

The capacities are based on the cladding providing adequate restraint to the attached flange.

Where the cladding provides reduced restraint the tables are highlighted in areas where there may be a reduction in the purlin capacity. In these areas it is recommended that the SupaPurlin software be used to determine more accurate design capacities.

Reduced cladding restraint may result from: shallow or weak cladding profiles; some clip-fixed claddings of low restraint; cladding installed with deep and low-rigidity thermal packers; non-steel claddings with large pre-drilled/punched holes that allow for thermal expansion; cladding not fixed directly to the purlin, eg largely spaced battens, combination of any of the above.

Size Availability:


NSW WA SA QLD/NT VIC/TAS

 
NSW
WA
SA
QLD/NT
VIC/TAS
SC/SZ 150
Yes
-

Yes

Yes
-
SC/SZ 200
Yes
-
Yes
Yes
-
SC/SZ 250
Yes
-
Yes
Yes
-
SC/SZ 300
Yes
-
Yes
Yes
-
SC/SZ 350
Yes
-
Yes
Yes
-
SC/SZ 400
-
-
Yes
Yes
-

 

Availability in other states is subject to enquiry.

NOTE: Other purlin profiles may be available subject to application and will incur added charges &/or lead times.

For purlin availability in other states, please see LYSAGHT® Zed & Cee Purlins and Girts

Warranty

Application for a SUPAPURLIN warranty must be lodged on our 'LYSAGHT SUPAZED & SUPACEE Request For Warranty' form, available by contacting the nearest BlueScope Lysaght Service Centre . The warranty is available subject to application and project size.

Further to this warranty offer, Industrial Galvanisers (in conjunction with BlueScope Lysaght) have developed the Permagal Purlin for applications of greater life requirements, more exposed situations or higher corrosive environments. Industrial Galvanisers use the BlueScope Lysaght range of purlins to manufacture the Permagal Purlin range of purlins

Application for a warranty must be lodged through Industrial Galvanisers on their 'Request for Permagal Purlin Coating Performance Warranty' form, available by contacting the nearest Industrial Galvanisers Service Centre. The warranty is available subject to application and the period of warranty is subject to the building application and exposure.

Click on a category below



Accessories

Accessories


SupaCee

SupaCee


SupaZed

SupaZed






Sitemap
Terms & Conditions
FAQ Knowledge Base
Privacy Policy
Mobile website
Forgot Password
About us
Adding Products
Warranties
 

All images & prices are representative only. All prices include GST & are subject to change.
All sales are as per our terms & conditions Copyright © 2017 - Mancer Corp Pty Ltd