Categories
Reviews more


LYSAGHT FLATDEK® II is a modern long span cladding particularly well suited to many types of home improvement projects such as room additions, carports and awnings. The underside of LYSAGHT FLATDEK® II features clean un-interrupted lines, with an attractive gloss finish.

  • Pan-fixed roof sheeting for open sided awnings where high degree of weather tightness is not required
  • The top side finished in a limited range of COLORBOND® steel colours. The ceiling side is finished in either Classic Cream™ or Paperbark® high gloss COLORBOND® steel.

Warnings

  • Available in Queensland only
  • May be used on roof pitches from as low as 2 degrees (1 in 30)
  • Read our

Product Details

Specification

Lengths

Sheets are custom cut to length

Material Specifications

  • COLORBOND® prepainted steel complying with AS/NZS 2728:Type 4, is made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass) or AZ200 (200g/m2minimum coating mass), or
  • The base metal thickness is 0.42mm

 

 

Availability

 

Availability

NSW/
ACT
VIC TAS QLD NT SA WA
Not Avail. Not Avail. Not Avail. Avail. Not Avail. Not Avail. Not Avail.

 

Colour Range

 

Topside - Standard COLORBOND® steel Underside - 80% Hi Gloss
Classic Cream™ Hi Gloss Classic Cream™
Surfmist® Hi Gloss Dover White
Classic Cream™ Hi Gloss Dover White
Paperbark® Hi Gloss Paperbark®
Wilderness® Hi Gloss Classic Cream™
Bluestone® Hi Gloss Classic Cream™

 

 

Design

Span Tables

The maximum recommended support spacings are based on testing in accordance with AS 1562.1-1992. Design and installation of sheet roof and wall cladding, and AS 4040.1-1992.Resistance to concentrated loads.**

The pressure considered is based on a typical awning Cpn=-0.8 and Kl=1.5 adjacent to an enclosed structure.

The tables are based on FLATDEK® II fixed to supports of 1.0mm BMT minimum. For FLATDEK® II awnings applications, the awning span is often governed by the capacity of the receiver channel and its connections. This must be considered in the design of any awning system.

Depending on support spacings used, LYSAGHT FLATDEK® II can be installed as either a:

  • Light foot traffic roof (incidental maintenance foot traffic acceptable); or
  • No foot traffic roof (will not support the weight of a person walking on it), this considers resistance to wind pressure only.
Spans for light foot traffic
Maximum support spacings (mm)
Span type Wind Classification to AS 4055
N1 (W28) N2 (W33) N3 (W41N) N4 (W50N)
Single
End
Internal
2400
2800
3200
2400
2800
3200
2400
2800
3200
2400
2800
3200
Spans for no foot traffic
Maximum support spacings (mm)
Span Type Wind classification to AS 4055
N1 (W28) N2 (W33) N3 (W41N) N4 (W50N)

Single
End
Internal
Stiffened Overhangs

5100*
4800
4800
600
5100*
4800
4800
600
4500
3700
4450
450
3300
3000
3500
400

Supports must be not less than 1mm BMT.
* Spans of 5100mm may result in noticable deflections under maximum loads. When deflections need to be considered in designs, reduce these spans to 4800mm.

 

Displaying 1 to 4 (of 4 products) Result Pages:  1 
FDRCH-FFoam Strip for receiver channel 2000mm$15.19 each

Buy Now
FDRCH6100Flatdek Receiver Channel 6100mm$126.66 each

Buy Now
Lysaght Flatdek Roofing - Fibreglass sheet 2400gm/m2FLATDEK-FGLysaght Flatdek Roofing - Fibreglass sheet 2400gm/m2$49.75 lin metres

Buy Now
Lysaght Flatdek Roofing - Double Sided 620mm wide (cover)FLATDEKIILysaght Flatdek Roofing - Double Sided 620mm wide (cover)$43.36 lin m

Buy Now
Displaying 1 to 4 (of 4 products) Result Pages:  1 





Sitemap
Terms & Conditions
FAQ Knowledge Base
Privacy Policy
Mobile website
Forgot Password
About us
Adding Products
Warranties
 

All images & prices are representative only. All prices include GST & are subject to change.
All sales are as per our terms & conditions Copyright 2017 - Mancer Corp Pty Ltd